Hi,

Pasquale,

Yes, you are correct - you cannot scale symbols in Stardraw Design 7. This is by design and the fact that Stardraw AV 2007 did this is an anomaly. Symbols are created at a specific size so that they can interoperate with each other and are consistent. For example, scaling a 19" Rack doesn't make sense because then no other Rack Mountable product can fit in it correctly.

You can scale images and the image handling capabilities in Stardraw Design 7 are far superior than Stardraw AV 2007 - complete with Brightness, Contrast & Transparency and, of course, scaling and rotation.

We've reproduced the problems you are seeing with Undo of rotated images and we are working on a fix for this.

David Snipp
Stardraw.com Ltd

Hi david!

I agree, i Also miss the possibillity to scale objects. I think you should have it. One of the purposes with SD7 was that it should be Project focused. I'm now in a rather big project were i'm gonna create maybe 40-50 drawings within this project. I would therefor wish to have them placed in the same project file. Some of the drawing are not focused on products but can be detail of a mounting bracket for instance or a placement of a connector box. For me i now have to draw these designs or drawing in AV2007. do some scaling there and save them. Then go to SD7 and import that drawing. It's not a popular work around for me and i loose time doing this also.

Best regards

Robert Nilsson

DAT AB

Hi David,

Yes, I think we should add the ability to lock the Aspect ratio by holding down the SHIFT key as you resize the image.

We'll add this to the development schedule.

David Snipp
Stardraw.com Ltd