Feathering looks like the way to go, thanks!

Hi Rich,

Great - I'm glad that's been useful.

Kind regards,
Rob Robinson
Stardraw.com

Just purchased Stardraw!  Gonna be fun getting into this project.

I did notice a couple minor errors with a product.  Is there an email for updating existing products?

Basically the Blackmagic Fiber Converters are a little mixed up.  The camera converter is drawn with ref in, when it only has ref out.  The studio converter is not drawn with ref at all, it has ref in and ref out.

I feel confident enough to edit the symbol, but seems like something that should be fixed anyway.

https://www.blackmagicdesign.com/products/blackmagicfiberconverters/techspecs/W-URSA-31

Hi Rich,

Thank you for your purchase and for bringing this to our attention.

The block schematic symbols for the Black Magic Design Camera Fiber Converter and Studio Fiber Converter have now been updated.  The new symbols will be available the next time you run SD7 and synchronization completes.
Please email symbols@stardraw.com with any symbol-related issues.
I hope this is helpful.

Thanks again
Kevin Harrison

+x

 

Kevin Harrison - 9/27/2023 7:42:45 AM

Hi Rich,

Thank you for your purchase and for bringing this to our attention.

The block schematic symbols for the Black Magic Design Camera Fiber Converter and Studio Fiber Converter have now been updated.  The new symbols will be available the next time you run SD7 and synchronization completes.
Please email symbols@stardraw.com with any symbol-related issues.
I hope this is helpful.

Thanks again
Kevin Harrison

Amazing!  Thank you!

Another question, can I install this on my desktop and laptop at the same time with one license?  Or would I have to enable and disable the license and move it around?

Hi Rich,

Under default settings your license is released back to the Cloud when you close Stardraw Design 7.3 so it can be instantly taken on a different machine; you just need to be sure not to leave Stardraw running.

FYI The setting is found in Tools | Personalization | Settings - "Release License on Close" should be checked and you won't need to change this to get the behavior you want.


Kind regards,
Rob Robinson
Stardraw.com

+x

 

Rob Robinson - 9/27/2023 4:40:25 PM

Hi Rich,

Under default settings your license is released back to the Cloud when you close Stardraw Design 7.3 so it can be instantly taken on a different machine; you just need to be sure not to leave Stardraw running.

FYI The setting is found in Tools | Personalization | Settings - "Release License on Close" should be checked and you won't need to change this to get the behavior you want.

Ha ha, just read that in the app home page.  Thanks again!