1) Cable Schedule: the logic which identifies the Start Port and End Port of a connected Cable has been modified to ensure that the selected port label is always the text closest to the start or end point of the Cable.  This solves a rare issue where the wrong port label might appear in the Cable Schedule if a) the symbol has been mirrored, AND, b) the closest port label in the mirrored symbol is significantly longer than an adjacent port label.

2) Cable Bridging has increased tolerance of Cable segments that are very slightly off the horizontal.  This means that a Cable Bridge will be created successfully when the segment of a Cable that appears to be horizontal is actually at a very slight angle.

3) Rubberbanding, where Cables move in conjunction with the movement of a symbol, maintaining the horizontal orientation of the connected Cable segment, is more tolerant of segments that are fractionally off the horizontal.  

4) Exception handling has been added so that if, on application startup, it is not possible to apply required changes to the Registry node HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Main\FeatureControl, then Stardraw Design 7.3 will open as normal without making those changes.  The settings are designed to improve the Start Page experience and apply only to the Current User and Stardraw Design 7.3.

5) Fixes bug which might cause thick lines in print, especially noticeable when outputting to smaller page sizes in PDF.  Previously, if an invalid value had been entered in the Personalization dialog resulting in an error, installations using imperial measurement units might reset Minimum Printed Line Width to 0.1".  The default setting of 0.001" is now enforced consistently unless a user defined value has been set.

Kind regards,
Rob Robinson
Stardraw.com