Stardraw Forums

Regenerating Product attributes - challenge

http://forums.stardraw.com/Topic9340.aspx

By JohnParker,CTS,CSP - 4/5/2012 6:33:59 AM

I have added attributes for products and am getting this message. My challenges are that the attributes are not being added and it will not go beyond this SD7 entered product. I had a variation in my UDP but deleted it in effort to fix this to no avail.

Please advise, thanks.



http://forums.stardraw.com/Uploads/Images/96f0b36c-2b27-4c74-84f9-6465.png
By Rob Robinson - 4/5/2012 6:57:47 AM

Hi John,

It looks like this message is being shown by Excel as it tries to create the Product Attributes spreadsheet.

This spreadsheet has a tab (sheet) for each manufacturer in your library, for both the manufacturer libraries that we provide and the manufacturers that you create for UDPs.

I suspect one or more of your UDPs has a manufacturer name that contains an illegal character; you can't use any of the following : * [ ] \ / ?

The manufacturer name probably begins between BOS and BRI.
By JohnParker,CTS,CSP - 4/5/2012 7:19:09 AM

Hi Rob,

I deleted the UDP that I thought was responsible; after changing all the descriptions, and block/schematic drawings, but as the pic shows it is the file from Stardraw that hangs it up. I have no UDP's with this. Please advise, and thanks
John
By Rob Robinson - 4/5/2012 8:15:08 AM

Hi John,

OK, we have been able to reproduce this effect - we will investigate further and post back to this thread as soon as possible.
By Rob Robinson - 4/5/2012 3:38:57 PM

Hi John,

We have published an update that allows use of Manufacturer names that include the characters : * [ ] \ / ? and generates the Product Attributes spreadsheet even when these characters are present.

You can install the update by choosing Help | Check for Updates, or just accept updates next time you run Stardraw Design 7.

Thanks for alerting us to this.
By JohnParker,CTS,CSP - 4/5/2012 6:20:39 PM

Thank you, but just ran the update update and I am having the same result....
By Rob Robinson - 4/5/2012 6:33:04 PM

Hi John,

Can you confirm the build date/time? Select Help | About Stardraw Design 7. It should be 05/04/2012 14:32:05
By JohnParker,CTS,CSP - 4/5/2012 6:53:04 PM

Confirmedhttp://forums.stardraw.com/Uploads/Images/3e06494a-4f94-48bb-9afb-01e4.png
By David Snipp - 4/6/2012 12:51:56 AM

John,

We've now published another update to Stardraw Design 7 that should finally resolve this problem.

The issue this time was the length of the Manufacturer Name.

Do please let us know if you continue to have any problems.