Hey Support,

I believe the Barco Clickshare CX-20 Gen 2 module is not correct.
The module doesn't have an HDMI output and has 4 usb inputs -- > it has only 1 USB-A & 1 USB-C

The Barco Clickshare CX-30 Gen 2 module is missing.

Regards,
Reginald

+x

 

Reginald - 5/14/2024 1:56:03 PM

Hey Support,

I believe the Barco Clickshare CX-20 Gen 2 module is not correct.
The module doesn't have an HDMI output and has 4 usb inputs -- > it has only 1 USB-A & 1 USB-C

The Barco Clickshare CX-30 Gen 2 module is missing.

Regards,
Reginald

Hi Reginald,
Thank you for your post and for bringing this to our attention.
The block schematic symbol for the ClickShare CX-20 Gen2 Wireless Conferencing System, has now been updated.  The new symbol will be available the next time you run SD7 and synchronization completes.
If you require symbols for the CX-30 Gen 2, please use the Product Request Service to request it, and any other products that you require that are not yet available in the libraries.
Please ensure that you direct all future symbol-related inquiries to symbols@stardraw.com.
Thanks again for getting in touch, I hope this is helpful.
Kind regards
Kevin Harrison

+x

 

Kevin Harrison - 5/14/2024 2:20:25 PM

+x

 

Reginald - 5/14/2024 1:56:03 PM

Hey Support,

I believe the Barco Clickshare CX-20 Gen 2 module is not correct.
The module doesn't have an HDMI output and has 4 usb inputs -- > it has only 1 USB-A & 1 USB-C

The Barco Clickshare CX-30 Gen 2 module is missing.

Regards,
Reginald

Hi Reginald,
Thank you for your post and for bringing this to our attention.
The block schematic symbol for the ClickShare CX-20 Gen2 Wireless Conferencing System, has now been updated.  The new symbol will be available the next time you run SD7 and synchronization completes.
If you require symbols for the CX-30 Gen 2, please use the Product Request Service to request it, and any other products that you require that are not yet available in the libraries.
Please ensure that you direct all future symbol-related inquiries to symbols@stardraw.com.
Thanks again for getting in touch, I hope this is helpful.
Kind regards
Kevin Harrison

Thanks for your fast response, unfortunately, the symbol isn't correct yet. Now you have also deleted the usb ports.
See the following link for the specs and available connections:
https://www.barco.com/nl/product/clickshare-cx-20?ccmpgn=T-00014123&utm_source=google&utm_medium=cpc&utm_campaign=a_cs_google_search_emea_na_dut_brand&utm_content=164395481448&utm_term=cx%2020%20conference&gad_source=1&gclid=CjwKCAjwl4yyBhAgEiwADSEjeHcxdEBlxJYI8KnxgR0kHMStbw55dhjcHl8KKa-wOARhsZMaWCiT-xoCW0wQAvD_BwE

Regards,
Reginald

+x

 

Reginald - 5/14/2024 2:29:54 PM

+x

 

Kevin Harrison - 5/14/2024 2:20:25 PM

+x

 

Reginald - 5/14/2024 1:56:03 PM

Hey Support,

I believe the Barco Clickshare CX-20 Gen 2 module is not correct.
The module doesn't have an HDMI output and has 4 usb inputs -- > it has only 1 USB-A & 1 USB-C

The Barco Clickshare CX-30 Gen 2 module is missing.

Regards,
Reginald

Hi Reginald,
Thank you for your post and for bringing this to our attention.
The block schematic symbol for the ClickShare CX-20 Gen2 Wireless Conferencing System, has now been updated.  The new symbol will be available the next time you run SD7 and synchronization completes.
If you require symbols for the CX-30 Gen 2, please use the Product Request Service to request it, and any other products that you require that are not yet available in the libraries.
Please ensure that you direct all future symbol-related inquiries to symbols@stardraw.com.
Thanks again for getting in touch, I hope this is helpful.
Kind regards
Kevin Harrison

Thanks for your fast response, unfortunately, the symbol isn't correct yet. Now you have also deleted the usb ports.
See the following link for the specs and available connections:
https://www.barco.com/nl/product/clickshare-cx-20?ccmpgn=T-00014123&utm_source=google&utm_medium=cpc&utm_campaign=a_cs_google_search_emea_na_dut_brand&utm_content=164395481448&utm_term=cx%2020%20conference&gad_source=1&gclid=CjwKCAjwl4yyBhAgEiwADSEjeHcxdEBlxJYI8KnxgR0kHMStbw55dhjcHl8KKa-wOARhsZMaWCiT-xoCW0wQAvD_BwE

Regards,
Reginald

Hi Reginald,

Please restart SD7 and allow synchronization to complete.

Should you have any further issues with symbols, contact us at symbols@stardraw.com

Thanks again
Kind regards
Kevin Harrison